OFFER AND MEET YOUR NEEDS

APOLLO SYSTEM

Transmitter
Model: C1-4PB/C2-4PB
Size: 50W x 70L x 190H mm
Weight:
485g
Model: C1-6PB/C2-6PB
Size: 50W x 70L x 215H mm
Weight: 515g

Click for larger picture! Model: C1-8PB/C2-8PB
Size: 50W x 70L x 240H mm
Weight:
560g
Click for larger picture! Model: C1-10PB/C2-10PB
Size: 50W x 70L x 265H mm
Weight:
615g

Click for larger picture! Model: C1-12PB/C2-12PB
Size: 50W x 70L x 290H mm
Weight:
650g
Click for larger picture! Model: C211
Size: 50W x 70L x 215H mm
Weight:
515g
 

Receiver
Click for larger picture!   Model: Box -1
  Suitable for: C1-4PB/6PB/8PB/C211 and C2-4PB
  Size: 200W x 120L x 75H mm
  Weight: 1080g
  Enclosure: IP65
  Application: for general crane, hoist

Click for larger picture!   Model: Box-2 ( with cable )
  Suitable for: C1-10/12PB and C2-6PB/8PB/10PB/12PB
  Size: 230W x 140L x 95H mm
  Weight: 1425g
  Enclosure: IP67
  Application: for general crane, hoist

Click for larger picture!   Model: Box-2-1 ( with instant connector )
  Suitable for: C1-10/12PB and C2-6PB/8PB/10PB/12PB
  Size: 230W x 140L x 95H mm
  Weight: 1425g
  Enclosure: IP67
  Application: for general crane, hoist

Anti-explosion type
Transmitter:
Click for larger picture!   Model: C1-6PB/DGTX
  Size: 340L x 170W x 91H mm
  Weight: 2kg
  Explosion protection: EExde II C T6

Receiver
Click for larger picture!   Model: Box3
  Suitable for: C1-6PB/DGTX
  Size: 410L x 270W x 170H mm
  Weight: 16kg
  Explosion protection: Exd IIB T4 ( d2G4 )
  Degree of protection: IP66
    Application: for Anti-explosion hoist, crane use in zone 1, zone 2 workshop.

The other anti-explosion models are also available.

 

Feature:

Modular design allows for easy upgrade to different models, unnecessary prime cost be reduced.

European standard switches inside, high sensitivity, long life with gold-plated connectors.

Anti-water/shock/dust PC case, suitable for the worst environment with international standard EMS button on the top.

Internal antenna design both in transmitter and receiver, avoid the possible breakage.

Take dual-security design, equipment protected thoroughly, every output will automatically break when CPU out of work.

Take common mode non-earth ground EMI noise-rejection circuit, which can against receiver malfunction occurred by operator¡¦s error connection, also releasing the installation complex.

Custom-made request accepted if standard model is still not able to meet your need!


Specification:

Transmitter
Frequency range: 170 ~ 480MHz
Channels separation: 50KHz
Transmitting power: < 10mW
Antenna: Internal type, impedance as 50£[.
Security codes: 256 sets
Operation temperature: -10¢XC ~ 75¢XC
Enclosure: IP65
Source voltage: 4 ¡Ñ 1.5V alkaline batteries, or nickel rechargeable batteries
Consumption: < 7mA

Receiver

Frequency range: 170 ~480MHz
Channels separation: 50KHz
Antenna: Internal type, impedance as 50£[.
Relay: 5A, 250V AC
Operation temperature: -10¢XC ~ 75¢XC
Enclosure: IP65
Source voltage 220V AC, 50 / 60Hz (STD)
Consumption: < 12W

Optional accessories:

  extend antenna   instant connector  


Back

 

 

 

 

 

qq